GEL FOR COMPRESSORS AND BEARINGS
(THE PRODUCT IS CERTIFIED)

For compressors: Compensation of wear and reduction of gaps in crank mechanisms (CM); elimination of ovality and conicity in cylinder-piston group; restoration of worn-out surfaces up to 0.5 mm; increase of oil pressure; suppression of noise and vibration; up to 25% energy savings. For bearings: compensation of wear and restoration of rubbing surfaces up to 0.02 mm; increase of surface hardness of the working surfaces of rubbing pairs (up to HV 500 kg/mm2)

Designed for restoration of cylinder-piston group and crank mechanism of compressors and restoration of the bearings working in oil bath.

1. The bearings working in oil bath are treated by XADO-gel for bearings.
2. Prior to the treatment of the bearings you should measure the gaps.
3. Prepare XADO-gel for treatment of bearings
   • Pour standard oil heated up to the temperature of 80^oC into the separate bowl, add the estimated amount of XADO-gel for bearings (1.2 ml of the gel for 1 l of the basic oil)
   • Stir thoroughly to obtain homogeneous mix.
4. Introduce the estimated amount of XADO-gel into the oil bath.
5. After 100-150 hours of continuous work of the bearing beginning from the start of the treatment it is considered finished. Measure the gaps again.