GEL FOR RESTORATION OF BARRELS OF THE RIFLED WEAPON
(PRODUCT CERTIFIED)

reconditioning and protection against wear of barrel bore surface; restoration of the geometry of the barrel bore (complete obturation); maximum killing power for a given ammunition; 10 times increased wear resistance and endurance of the barrel; enhanced grazing effect of the shot; augmented grouping of the shot; bullet outlet velocity increased by 5-15 m/s for new barrels; bullet outlet velocity increased by 20% for worn barrels; reduced vibration of the barrel

Restoration process goes while shooting. Gel is applied on the inner surface of the barrel and a bullet. The number of shots required is defined by the barrel's ware level and equals from 3 (minimum) to 10 (maximum).

1. The gel is designed for treatment of rifled barrels of ANY CALIBER.
2. Amenable to reconditioning are barrels having the following defects: scoring; microcracks; spalling of chromium; pit-holes; rust; abrasion of rifling lands, swelling.
3. It is not recommended to treat barrels bulged to an outside surface camber.
4. Treatment should be conducted under supervision of a specialist (shooting range/gallery instructor) with observance of appropriate safety precautions.
5. Prior to treatment thoroughly clean the barrel bore without oiling.

Gels of different functionality are places in the same tube. It's impossible to confuse the order of the gel application because it is placed in the tube in the corresponding order and is colored in red, yellow and green.

The red gel is used on the first stage (3 shots) which can be considered the most "rough" as to the effect. It prepares the surface, make a sort of grinding.

1. Using a wire brush apply red gel to the insides of the barrel.
2. Smear with gel the surface of the bullet, which projects from the cartridge.
3. Fire a shot.
4. Fire at least another 2 shots upon repeating steps 1 and 2.

The coating itself is formed on the second stage.

1. Fire at least 3 shots having treated the barrel bore and the bullet with yellow gel.

The green gel which takes a half of the tube is applied on the third stage. It fixes the coating.

1. Fire at least 3 shots having applied green gel.

Note !

1. New barrels are to be treated by firing 2 shots using green gel.
2. For preventive maintenance it is recommended to fire 5 shots once a year using green gel or 3 shot following every thousand of shots.

Attention !

In handling weapon strictly observe all relevant safety precautions. Keep this gel out of reach of children.

The Manufacturer guarantees the wear resistance of the protective coating within 1 year.